Enlarged version of the roofing material EB1 with less pronounced pattern. This pattern differs from the EB1 mainly with its size and weight. The shape is also based on established Czech tradition and with EB1, it is among our most widely used products. It is perfect as a replacement of used tiles in the same shape.
The roofing material EKOternit very well withstands high temperatures in summer and very cold temperatures in the winter months. Our roofing material is also UV-resistant.
The roofing material EKOternit shows us many years of experience, multilateral and quality use of recycled plastic. If you think about the most appropriate roofing, we believe our offer is the best option.
Features and Technical Specifications of Roofing Material
5 – 6 mm
Number of pc/m2
Minimal slope of roof
The used material supposes long lifetime period of more than 30 years
Overall all-boarded roof constructions
The roofing material EKOternit is laid on all-boarded roofs. We recommend underlaying the roofing with diffusion sheeting or other insulation. We recommend ensuring ventilation of the attic.
Laying this roofing material is the same as for eternit or slate roofing, including the mounting of snow barriers.
It has a three point anchoring of roofing templates, ie. 2 pcs of preferably copper nails 40 mm long and 1 pc of 25x27mm whirlwind fibula, into pre-drilled holes. The nails should not be hammered too tightly in terms of material dilatation and to prevent undesirable deformations. When laying the roofing, it is necessary to leave 4.9 mm DILATATIONAL GAP between individual pieces. The tip of the overlapping item should be pulled out by 4.9 mm. The emphasis on the required dilatational gap is greater in cold weather.
Documents and protocols
The products of EKOternit company are in compliance with the requirements of European and Czech standards.